DCS World 2.5
F-86F Sabre
A skin pack of three JRV Sabre paint schemes.
Yugoslavia received ex-RAF Sabres during the late 1950s via the Mutual Defense Aid Program. These Sabres were Canadair-built Mk.4 aircraft which were upgraded with the 6-3 wing and given the US designation F-86E(M), 'M' for Modified.
Yugoslavia received ex-RAF Sabres during the late 1950s via the Mutual Defense Aid Program. These Sabres were Canadair-built Mk.4 aircraft which were upgraded with the 6-3 wing and given the US designation F-86E(M), 'M' for Modified.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 133.73 МБ
- Скачано: 221
- Комментариев: 1
DCS World 2.5
F-86F Sabre
Canadair Sabre Mk.5 23060 of No. 443 "City of New Westminster" Squadron, RCAF Station Sea Island, British Columbia, circa 1957.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 27.33 МБ
- Скачано: 225
- Комментариев: 0
DCS World 2.5
F-86F Sabre
Canadair Sabre Mk.5 23036 of No. 442 "City of Vancouver" Squadron, RCAF Station Sea Island, British Columbia, circa 1957.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 27.33 МБ
- Скачано: 144
- Комментариев: 0
DCS World 2.5
F-86F Sabre
Canadair Sabre Mk.6 2024 of the Fuerza Aerea Colombiana, circa 1957.
Colombia purchased six Canadair Sabre Mk.6 aircraft in 1956, serials allocated in the 2000 series (Close Air Support role), were 2021-2026 inclusive.
Sorry, leading edge slats not included.
Colombia purchased six Canadair Sabre Mk.6 aircraft in 1956, serials allocated in the 2000 series (Close Air Support role), were 2021-2026 inclusive.
Sorry, leading edge slats not included.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 29.32 МБ
- Скачано: 158
- Комментариев: 5
DCS World 2.5
F-86F Sabre
Canadair Sabre Mk.5 23339 of No. 441 "Silver Fox" Squadron, No. 1 (Fighter) Wing, RCAF Station Marville, France, circa 1955.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 25.69 МБ
- Скачано: 184
- Комментариев: 0
DCS World 2.5
F-86F Sabre
Canadair Sabre Mk.5 23132 of No. 427 "Lion" Squadron, 3 (Fighter) Wing, RCAF Station Zweibrücken, West Germany, circa 1954.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 25.7 МБ
- Скачано: 121
- Комментариев: 1
DCS World 2.5
F-86F Sabre
Canadair Sabre Mk.6 23392 of No. 422 "Tomahawk" Squadron, No. 4 (Fighter) Wing, RCAF Station Baden-Söllingen, West Germany, circa 1955.
The Mk.6 version of the Sabre introduced the Canadian-built, two stage Orenda 14 engine, rated to 7,275 lbs of thrust. The wing leading edge slats were eventually re-introduced while retaining portions of the 6-3 wing configuration. The Mk.6 therefore acquired a superb combination of engine and aerodynamics and was widely regarded as the best "dog-fighter" of its era.
The Mk.6 version of the Sabre introduced the Canadian-built, two stage Orenda 14 engine, rated to 7,275 lbs of thrust. The wing leading edge slats were eventually re-introduced while retaining portions of the 6-3 wing configuration. The Mk.6 therefore acquired a superb combination of engine and aerodynamics and was widely regarded as the best "dog-fighter" of its era.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 26.44 МБ
- Скачано: 233
- Комментариев: 0
DCS World 2.5
F-86F Sabre
Canadair Sabre Mk.5 23220 of No. 439 "Sabre-Toothed Tiger" Squadron, No. 1 (Fighter) Wing, RCAF Station Marville, France, circa 1955.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 25.65 МБ
- Скачано: 157
- Комментариев: 0
DCS World 2.5
F-86F Sabre
Replacement cockpit textures for the DCS F-86F module.
The cockpits of Canadair-built Sabres differed slightly from their US-built counterparts. This texture pack can be used to simulate the cockpits of the Canadair Sabre Mk.5 and Mk.6, as flown by Canada, as well as other nations including West Germany, Columbia, Pakistan, and South Africa.
The cockpits of Canadair-built Sabres differed slightly from their US-built counterparts. This texture pack can be used to simulate the cockpits of the Canadair Sabre Mk.5 and Mk.6, as flown by Canada, as well as other nations including West Germany, Columbia, Pakistan, and South Africa.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 20.93 МБ
- Скачано: 410
- Комментариев: 2
DCS World 2.5
F-86F Sabre
Replacement cockpit textures for the DCS F-86F module.
Early F-86 Sabres had matte black cockpits. This texture pack can be used to simulate the cockpits of early North American F-86 Sabres, as well as the Canadair-built Sabre Mk.2 and Mk.4, as flown by Canada, as well as other NATO nations including Greece, Italy, Turkey, Yugoslavia, and the United Kingdom.
Early F-86 Sabres had matte black cockpits. This texture pack can be used to simulate the cockpits of early North American F-86 Sabres, as well as the Canadair-built Sabre Mk.2 and Mk.4, as flown by Canada, as well as other NATO nations including Greece, Italy, Turkey, Yugoslavia, and the United Kingdom.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 17.85 МБ
- Скачано: 726
- Комментариев: 2
