DCS World 2.7
Другой
Practice, practice, practice. You can never get enough of it. This is a mission to practice rocket and guns multiple attacks against targets located on the runways of an abandoned airbase. It is dawn on a cold January morning - the sun isn't quite peeking over the mountains yet, but visibility is pretty good. Have fun!
- Лицензия: Свободная - Бесплатная версия, Неограниченное распр.
- Язык: Английский
- Размер файла: 9.96 КБ
- Скачано: 228
- Комментариев: 0
DCS World 2.7
F-86F Sabre
Тип файла - Текстура
Дата - 04.12.2022 22:12:52
Snow camo with Shark teeth and no country markings.
- Лицензия: Свободная - Бесплатная версия, Неограниченное распр.
- Язык: Английский
- Размер файла: 6.39 МБ
- Скачано: 113
- Комментариев: 2
Любая версия
Spitfire LF Mk. IX
Тип файла - Другой
Дата - 04.12.2022 20:30:30
Alternate theme and main screen music for the Spitfire.
OvGME ready, IC Compliant.
OvGME ready, IC Compliant.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 14.33 МБ
- Скачано: 173
- Комментариев: 0
Любая версия
A-10C II Tank Killer
Тип файла - Текстура
Дата - 04.12.2022 19:31:31
A Fictional RNLAF skin for the A-10C II based of the 312 SQN from air base Volkel.
- Лицензия: Свободная - Бесплатная версия, Неограниченное распр.
- Язык: Любой язык
- Размер файла: 14.22 МБ
- Скачано: 115
- Комментариев: 0
DCS World 2.7
Другой
AI only O-2A aircraft mod by prcCOWBOY v1.1.0123 (2023-01 Update)
The O-2, known as the “Oscar Deuce” or “The Duck,” was a military version of the Cessna Model 337 Super Skymaster. It was distinguished by twin tail booms, tandem-mounted engines and a unique gear retraction sequence that evoked the nickname "The Duck." In late 1966, the USAF selected the O-2, to serve as a forward air controller (FAC) aircraft.
The O-2, known as the “Oscar Deuce” or “The Duck,” was a military version of the Cessna Model 337 Super Skymaster. It was distinguished by twin tail booms, tandem-mounted engines and a unique gear retraction sequence that evoked the nickname "The Duck." In late 1966, the USAF selected the O-2, to serve as a forward air controller (FAC) aircraft.
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Любой язык
- Размер файла: 76.47 МБ
- Скачано: 1292
- Комментариев: 4
Любая версия
F/A-18C
Тип файла - Одиночная миссия
Дата - 04.12.2022 08:40:37
The Mission from my YouTube video named "Tanker Hunt"
- Лицензия: Свободная - Бесплатная версия, Неограниченное распр.
- Язык: Английский
- Размер файла: 17.54 КБ
- Скачано: 352
- Комментариев: 1
DCS World 2.7
A-10C II Tank Killer
A-10CII painted in Charcoal Lizard livery portraying an aircraft from 23rd TFW, 76th TFS
- Лицензия: Свободная - Бесплатная версия, Не для распространения
- Язык: Английский
- Размер файла: 41.07 МБ
- Скачано: 1122
- Комментариев: 2
DCS World
F/A-18C
The USS Abraham Lincoln (CVN-72) and her strike group (ABECSG) have deployed to the Marianas Islands for exercises. Accompanied by USS Tarawa (LHA-1), the pilots of carrier air wing nine (CVW-9) and VMA-211 are tasked with completing carrier qualifications and V/STOL qualifications, as well as practicing air-to-air refueling and weapons employment.
- Лицензия: Свободная - Бесплатная версия, Неограниченное распр.
- Язык: Английский
- Размер файла: 1.48 МБ
- Скачано: 1032
- Комментариев: 7
Любая версия
F-16C Viper
Тип файла - Документ
Дата - 03.12.2022 22:15:31
A set of useful kneeboards that I often use in missions and practice.
- Лицензия: Свободная - Бесплатная версия, Неограниченное распр.
- Язык: Английский
- Размер файла: 576.96 КБ
- Скачано: 2258
- Комментариев: 1
Любая версия
Другой
Here's a free mount for TrackIR if you've ever lost or broken one (I've lost 2). Got fed up with the replacement cost so I decided to design one myself.
Download them and then upload them to a 3D printing service and have them printed.
I prefer Nylon which is strong and maintains the small details but you can try PLA plastic although I don't recommend it.
Nylon will be a little more expensive but worth it. The printing will take about one week.
You'll also need 4 M2 x 12mm screws and nuts. I use nuts with the nylon insert so they don't loosen.
You can also glue the parts together.
You'll also need a small magnet and I've sourced one here: https://www.ebay.com/itm/374032601246
You'll need a couple drops of Super Glue and make sure you glue the correct polarity up / down.
I also glue velcro to the base and legs and then to the top of my monitor to keep it in place.
I don't know if they will fit Track IR 4 or 3.
Hope you like it and can use it courtesy of Combat King Simulation
Download them and then upload them to a 3D printing service and have them printed.
I prefer Nylon which is strong and maintains the small details but you can try PLA plastic although I don't recommend it.
Nylon will be a little more expensive but worth it. The printing will take about one week.
You'll also need 4 M2 x 12mm screws and nuts. I use nuts with the nylon insert so they don't loosen.
You can also glue the parts together.
You'll also need a small magnet and I've sourced one here: https://www.ebay.com/itm/374032601246
You'll need a couple drops of Super Glue and make sure you glue the correct polarity up / down.
I also glue velcro to the base and legs and then to the top of my monitor to keep it in place.
I don't know if they will fit Track IR 4 or 3.
Hope you like it and can use it courtesy of Combat King Simulation
- Лицензия: Свободная - Бесплатная версия, Неограниченное распр.
- Язык: Английский
- Размер файла: 1.74 МБ
- Скачано: 159
- Комментариев: 1
