User Files Search DCS
DCS: World 2.5
F-16C Viper
F-16C Viper T.Flight Hotas X (Thrustmaster) Profile v1.2 for DCS 2.5.6 Open Beta. See included diagram for reference. Requires 2 Modifier buttons for 4 command layers, axis assignments and TrackIR (or replace Trim commands with POV). PowerPoint included so you can customise and reprint diagram. This is work-in-progress as the module is still in development.
- Licence: Freeware - Version Gratuite, Ne Pas Redistribuer
- Langue: Anglais
- Taille: 1.71 Mo
- Téléchargé: 6425
- Commentaires: 19
DCS: World 2.5
JF-17 Thunder
JF-17 Thunder T.Flight Hotas X (Thrustmaster) Profile v1.3 for DCS 2.5.6 Open Beta. See included diagram for reference. Requires 2 Modifier buttons for 4 command layers, axis assignments and TrackIR (or replace Trim commands with POV). Underlined commands are likely still under development. PowerPoint included so you can customise and reprint diagram.
- Licence: Freeware - Version Gratuite, Ne Pas Redistribuer
- Langue: Anglais
- Taille: 1.69 Mo
- Téléchargé: 770
- Commentaires: 3
DCS World 2.7
F/A-18C Hornet
F/A-18C Hornet T.Flight Hotas X (Thrustmaster) Profile v2.0 for DCS 2.7 Open Beta. See included diagram for reference. Requires 2 Modifier buttons for 4 command layers, axis assignments and TrackIR (or replace Trim commands with POV). PowerPoint included so you can customise and reprint diagram.
Updated for DCS 2.7:
1. ATFLIR / Litening II Pod refinements.
2. Replaced padlock commands on stick for cage/uncage, salute, hornet ball.
3. Added tables of some miscellaneous sim commands.
Updated for DCS 2.7:
1. ATFLIR / Litening II Pod refinements.
2. Replaced padlock commands on stick for cage/uncage, salute, hornet ball.
3. Added tables of some miscellaneous sim commands.
- Licence: Freeware - Version Gratuite, Ne Pas Redistribuer
- Langue: Anglais
- Taille: 1.58 Mo
- Téléchargé: 11231
- Commentaires: 53
DCS: World 2.5
F/A-18C Hornet
So here's my F/A-18C profile. It uses rudders and trackIR so those functions aren't bound on the joystick but can easily be added.
The scroll wheel for radar elevation works by having a dead zone set, leave the wheel relatively centered to stop it moving and 100% up or down to move radar elevation up or down. It's also bound on modifier spots of speedbrake button but not shown on the diagram.
Edit: I included a screenshot of my axis tune panel for the radar elevation control. (Deadzone: 20 Sat X: 100 Sat Y: 30 Curvature: 20)
The dispenser bypass switch has to be held down to put it in bypass mode, so for example to use flares you have to hold the hat left while flicking it forward to flare.
Updated to work with the new beta, also added throttle lift binds but are not on picture.
The scroll wheel for radar elevation works by having a dead zone set, leave the wheel relatively centered to stop it moving and 100% up or down to move radar elevation up or down. It's also bound on modifier spots of speedbrake button but not shown on the diagram.
Edit: I included a screenshot of my axis tune panel for the radar elevation control. (Deadzone: 20 Sat X: 100 Sat Y: 30 Curvature: 20)
The dispenser bypass switch has to be held down to put it in bypass mode, so for example to use flares you have to hold the hat left while flicking it forward to flare.
Updated to work with the new beta, also added throttle lift binds but are not on picture.
- Licence: Freeware - Version Gratuite, Distribution non limitée
- Langue: Anglais
- Taille: 301.74 Ko
- Téléchargé: 5755
- Commentaires: 32
DCS: World
AV-8B Night Attack V/STOL
This is my config for T.16000M in combination with TRACK IR and pedals, let me know if you need help configuring it for use without.
The image is a little rough but it should be readable.
This is based on Nunupts user profiles which I use in most other modules. I also took some inspiration from NOiDs Warthog profile and Chuck's Harrier guide, so shout out to all the above!
Any feedback on improving it or if I left something out let me know!
V2: I added water mode and FLAPS controls to improve VSTOL, removed redundant nozzle up and down because I consider the knob a far superior way to control the nozzle (go team venture!)
V3: Swapped sensor select down: hud scene reject/tgp with AG target undesignate/NWS/FOV toggle, it makes more sense having lock and unlock on the same key but with modifier. Also added reverse ext lights with modifier. Added Nozzle STO stop to slider on joystick
The image is a little rough but it should be readable.
This is based on Nunupts user profiles which I use in most other modules. I also took some inspiration from NOiDs Warthog profile and Chuck's Harrier guide, so shout out to all the above!
Any feedback on improving it or if I left something out let me know!
V2: I added water mode and FLAPS controls to improve VSTOL, removed redundant nozzle up and down because I consider the knob a far superior way to control the nozzle (go team venture!)
V3: Swapped sensor select down: hud scene reject/tgp with AG target undesignate/NWS/FOV toggle, it makes more sense having lock and unlock on the same key but with modifier. Also added reverse ext lights with modifier. Added Nozzle STO stop to slider on joystick
- Licence: Freeware - Version Gratuite, Distribution non limitée
- Langue: Anglais
- Taille: 344.69 Ko
- Téléchargé: 2356
- Commentaires: 8
